Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected issues. Fortunately, resetting your Holosun is a straightforward process that can be performed in just a few steps.

• Begin by ensuring your red dot sight is powered on.
• Locate the small reset button on the bottom of the sight.
• Employ a paperclip to depress the reset lever for approximately three moments.
• Let go the reset button and your Holosun EPS Carry Red Dot sight will restart.
• Its red dot sight should now be returned to its factory settings.

Restore Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it to its factory configuration is a breeze. First, locate the tiny button on the side of your optic. Then, press and hold it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now returned to its factory settings, ready for accurate shooting.

revive your Holosun EPS Carry Back to Action

Is your get more info beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Hold down the power button for approximately 7 seconds.
• A message will flash, indicating that the reset is successfuly initiated.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and verify your sight's functionality. If you encounter any further problems, don't hesitate to seek help from Holosun's support.

Revert Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• First, Energize your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, press the power button once.
• The display will show a confirmation prompt indicating that the reset process is initiated.
• Permit the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically shutdown.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Reset All". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Restore your Holosun EPS Carry through a Factory Original Settings

If your Holosun EPS Carry is acting up, a factory reset might be the fix. This will restore your sight to its initial settings, clearing any altered configurations you've made. To perform this reset, adhere to these easy steps:

• To begin, find the reset lever on your EPS Carry.
• Then, engage a small object, like a pen tip, to activate the reset lever.
• During keep the reset lever activated, turn your EPS Carry.
• The sight will display a message confirming that the reset is finished.

Once the reset is successful, your EPS Carry will be back to its factory settings.

Report this wiki page